The only obstacle to installing electrically powered heating equipment is the low line power. You need to make the appropriate calculations beforehand. On average, heating a room of 10 square meters will consume one kilowatt of power per hour. garage, the area of which is equal to 150 square meters, will assume 150 kilowatts. It is possible to do heating in the garage from electricity, and if we are talking about outdated power lines, with the known indicators, the system may fail. It is also important to take into account the fact that in addition to heating devices, other devices consuming a certain power will work. This indicates the need to add approximately 5 kilowatts per hour to a given design power. In the meantime, perhaps you also want to visit the Garage Master Blog to find a high-quality electric garage heater.

The heating device of the described type consists of a metal body on which a tubular heating element is built. They are controlled by a thermostat. Each heating element is a high resistance conductor wrapped in a ceramic sheath. The conductor body is sealed and made of steel or aluminum. This design allows an impressive increase in the area of interaction with air, providing heating. The temperature of the elements can vary from 60 to 100 degrees. Before heating the garage, you need to familiarize yourself with the principle of the convector. After switching on, heating the heating element starts. According to the laws of physics, air, whose temperature decreases, begins to fall. It enters through the lower grate into the structure and passes through the heating element. This allows for constant air movement. The dual air circulation process allows the creation of a comfortable microclimate in the garage.

If necessary, you can use a fan, with which natural convection will be accelerated. If you are thinking about how to make a heater in the garage, you should remember that the convector, due to its design features, has one major drawback, which is expressed in the uneven heating of the air.

Leave a Reply

Your email address will not be published. Required fields are marked *